Minigolf Custom Map Editor

Roadmap: Trello Updates
1

Card

https://trello.com/c/stYi9kCQ/743-minigolf-custom-map-editor

Description

This card has no description.

Overall

  • Setup tools to be IO
  • Changing edge/railing color
  • Changing edge/railing types
  • Changing grass color
  • Changing grass types
  • Canvas / surface support for base pieces
  • Loop Tool
  • Outer Corner Tool
  • Inner Corner Tool
  • S-Bend Tool
  • Side-Shift Tool
  • Path-Curve Tool
  • Half-Pipe Tool
  • Ramp Tool
  • Intersection Tool
  • Holes Tool
  • Coloring Start Pad
  • Coloring Flag
  • Flag Light Mode
  • Intro Camera
  • End Piece Tool
  • Guide
  • Resolve issues with not being able to putt while on a moving platform

Loop Tool

  • Loop Size setting
  • Flat Base setting
  • Base Height setting
  • Walls variations (Two-Sided, One-Sided, None)
  • Wall Height settings

Holes Tool

  • Hole Type setting (Flag Hole, Drop Hole)
  • Dip setting

Path-Curve Tool

  • Ramp settings
  • Flat Base setting
  • Base Height settings
  • Wall variations (Two-Sided, One-Sided, One-Sided Reversed, None)
  • Wall Height settings
  • Length settings

Side-Shift Tool

  • Ramp settings
  • Length settings
  • Flat Base setting
  • Base Height settings
  • Wall variations (Two-Sided, One-Sided, None)
  • Wall Height settings
  • Fill settings (flats only)

Outer Corner Tool

  • Corner Shape settings (90, 45, Curve)
  • Corner Magnitude settings
  • Fill settings
  • Wall variations (Walls or No Walls)
  • Wall Height settings

Straight Tool

Half-Pipe Tool

  • Flat Base setting
  • Base Height settings
  • Length settings
  • Wall variations (Two-Sided, One-Sided, None)
  • Wall Height settings

Intersection Tool

  • Corner Type setting (90, 45, Curve)
  • Fill settings
  • Wall Height settings

S-Bend Tool

  • Ramp settings
  • Length settings
  • Fill settings (flats only)
  • Wall variations (Two-Sided, One-Sided, None)
  • Wall Height settings
  • Flat Base setting
  • Base Height settings

Inner Corner Tool

  • Corner Shape Settings (90, 45, Curve)
  • Corner Magnitude settings
  • Fill settings
  • Wall variations (Walls or No Walls)
  • Wall Height settings

Ramp Tool

  • Steepness settings
  • Ramp Type variations (Ramp-Start, Ramp-End, Mid)
  • Curve Tightness settings
  • Flat Base setting
  • Base Height settings
  • Wall variations (Two-Sided, One-Sided, None)
  • Wall Height settings
2 Likes
2
  • A new checklist named “Intersection Tool” has been added to the card.
  • A new checklist named “Path Tool” has been added to the card.
  • A new checklist named “Inner Corner Tool” has been added to the card.
  • A new checklist named “Outer Corner Tool” has been added to the card.
  • A new checklist named “Ramp Tool” has been added to the card.
2 Likes
3
  • “100x100 enumerated tool” has been checked off on the “Ramp Tool” checklist.
  • “200x200 enumerated tool” has been checked off on the “Ramp Tool” checklist.
  • “200x200 tileable models” has been checked off on the “Ramp Tool” checklist.
  • “100x100 tileable models” has been checked off on the “Ramp Tool” checklist.
2 Likes
4
  • “Flat base or ramped base feature” has been checked off on the “Ramp Tool” checklist.
  • “Tile size feature” has been checked off on the “Ramp Tool” checklist.
  • “No Walls/1 Wall/2 Walls selection feature” has been checked off on the “Ramp Tool” checklist.
  • “Ramp type feature” has been checked off on the “Ramp Tool” checklist.
  • “Ramp height feature” has been checked off on the “Ramp Tool” checklist.
  • “Curve tightness feature” has been un-checked on the “Ramp Tool” checklist.
  • “Curve tightness feature” has been checked off on the “Ramp Tool” checklist.
  • “Wall height feature” has been checked off on the “Ramp Tool” checklist.
3 Likes
5
  • “200x200 enumerated tool” has been checked off on the “Outer Corner Tool” checklist.
  • “400x400 tileable models” has been checked off on the “Outer Corner Tool” checklist.
  • “200x200 tileable models” has been checked off on the “Outer Corner Tool” checklist.
  • “100x100 enumerated tool” has been checked off on the “Outer Corner Tool” checklist.
  • “100x100 tileable models” has been checked off on the “Outer Corner Tool” checklist.
  • “Final Outer Corner Tool (combined enumerated)” has been un-checked on the “Outer Corner Tool” checklist.
  • “Final Outer Corner Tool (combined enumerated)” has been checked off on the “Outer Corner Tool” checklist.
  • “Fill type feature” has been un-checked on the “Outer Corner Tool” checklist.
  • “Angle magnitude feature” has been checked off on the “Outer Corner Tool” checklist.
  • “Fill type feature” has been checked off on the “Outer Corner Tool” checklist.
  • “Wall height feature” has been checked off on the “Outer Corner Tool” checklist.
  • “Tile size feature” has been checked off on the “Outer Corner Tool” checklist.
  • “Corner type feature” has been checked off on the “Outer Corner Tool” checklist.
3 Likes
6
  • “Wall height feature” has been checked off on the “Inner Corner Tool” checklist.
3 Likes
7
  • “100x100 enumerated tool” has been checked off on the “Inner Corner Tool” checklist.
  • “100x100 tileable models” has been checked off on the “Inner Corner Tool” checklist.
  • “Fill type feature” has been checked off on the “Inner Corner Tool” checklist.
  • “Fill type feature” has been un-checked on the “Inner Corner Tool” checklist.
  • “Fill type feature” has been checked off on the “Inner Corner Tool” checklist.
  • “Angle Magnitude feature” has been checked off on the “Inner Corner Tool” checklist.
3 Likes
8
  • “200x200 enumerated tool” has been checked off on the “Inner Corner Tool” checklist.
  • “200x200 tileable models” has been checked off on the “Inner Corner Tool” checklist.
2 Likes
9
  • “Final Inner Corner Tool (combined enumerated)” has been checked off on the “Inner Corner Tool” checklist.
  • “400x400 enumerated tool” has been checked off on the “Inner Corner Tool” checklist.
  • “400x400 tileable models” has been checked off on the “Inner Corner Tool” checklist.
2 Likes
10
  • “Corner Type feature” has been checked off on the “Intersection Tool” checklist.
  • “Final Intersection Tool (combined enumerated)” has been checked off on the “Intersection Tool” checklist.
  • “400x400 enumerated tool” has been checked off on the “Intersection Tool” checklist.
  • “200x200 enumerated tool” has been checked off on the “Intersection Tool” checklist.
  • “100x100 enumerated tool” has been checked off on the “Intersection Tool” checklist.
  • “400x400 tileable models” has been checked off on the “Intersection Tool” checklist.
  • “200x200 tileable models” has been checked off on the “Intersection Tool” checklist.
  • “100x100 tileable models” has been checked off on the “Intersection Tool” checklist.
3 Likes
11
  • A new checklist named “Loop-de-Loop Tool” has been added to the card.
  • “Tile Size Feature” has been checked off on the “Intersection Tool” checklist.
3 Likes
12
  • “200x200 tileable models” has been checked off on the “Loop-de-Loop Tool” checklist.
  • “100x100 tileable models” has been checked off on the “Loop-de-Loop Tool” checklist.
4 Likes
13
  • A new checklist named “Overall” has been added to the card.
2 Likes
14
  • “Intersection Tool” has been checked off on the “Overall” checklist.
  • “Loop-de-Loop Tool” has been checked off on the “Overall” checklist.
  • “400x400 tileable models” has been checked off on the “Loop-de-Loop Tool” checklist.
3 Likes
15
  • “Inner Corner Tool” has been checked off on the “Overall” checklist.
  • ““Flat” / No Walls feature” has been checked off on the “Inner Corner Tool” checklist.
  • “Outer Corner Tool” has been checked off on the “Overall” checklist.
  • ““Flat” / No Walls feature” has been checked off on the “Outer Corner Tool” checklist.
3 Likes
16
  • “400x400 tileable s-bends” has been checked off on the “Path Tool” checklist.
  • “200x200 tileable s-bends” has been checked off on the “Path Tool” checklist.
  • “100x100 tileable s-bends” has been checked off on the “Path Tool” checklist.
3 Likes
17
  • “Setup tools to be IO items” has been checked off on the “Overall” checklist.
  • “Changing edge/railing color” has been checked off on the “Overall” checklist.
  • “Changing edge/railing types” has been checked off on the “Overall” checklist.
  • “Changing grass color” has been checked off on the “Overall” checklist.
  • “Changing grass types” has been checked off on the “Overall” checklist.
2 Likes
18
  • A new checklist named “Overall” has been added to the card.
  • The checklist “Overall” was removed from the card.
  • The checklist “Loop-de-Loop Tool” was removed from the card.
  • The checklist “Intersection Tool” was removed from the card.
  • The checklist “Path Tool” was removed from the card.
  • The checklist “Inner Corner Tool” was removed from the card.
  • The checklist “Outer Corner Tool” was removed from the card.
  • The checklist “Ramp Tool” was removed from the card.
2 Likes
19
  • A new checklist named “Side-Shift Tool” has been added to the card.
  • A new checklist named “S-Bend Tool” has been added to the card.
  • A new checklist named “Straight Tool” has been added to the card.
  • A new checklist named “Inner Corner Tool” has been added to the card.
  • A new checklist named “Outer Corner Tool” has been added to the card.
  • A new checklist named “Loop Tool” has been added to the card.
2 Likes
20
  • “Wall Height settings” has been checked off on the “Loop Tool” checklist.
  • “Walls variations” has been checked off on the “Loop Tool” checklist.
  • “Base Height setting” has been checked off on the “Loop Tool” checklist.
  • “Flat Base setting” has been checked off on the “Loop Tool” checklist.
  • “Loop Size setting” has been checked off on the “Loop Tool” checklist.
2 Likes