Minigolf Custom Map Editor

Roadmap: Trello Updates
21
  • “Wall Height settings” has been checked off on the “Outer Corner Tool” checklist.
  • “Wall variations” has been checked off on the “Outer Corner Tool” checklist.
  • “Fill settings” has been checked off on the “Outer Corner Tool” checklist.
  • “Corner Magnitude settings” has been checked off on the “Outer Corner Tool” checklist.
  • “Corner Shape settings (90, 45, Curve)” has been checked off on the “Outer Corner Tool” checklist.
2 Likes
22
  • “Inner Corner Tool” has been checked off on the “Overall” checklist.
  • “Wall Height settings” has been checked off on the “Inner Corner Tool” checklist.
  • “Wall variants” has been checked off on the “Inner Corner Tool” checklist.
  • “Fill settings” has been checked off on the “Inner Corner Tool” checklist.
  • “Corner Magnitude settings” has been checked off on the “Inner Corner Tool” checklist.
  • “Corner Shape Settings (90, 45, Curve)” has been checked off on the “Inner Corner Tool” checklist.
2 Likes
23
  • “Wall Height settings” has been checked off on the “S-Bend Tool” checklist.
  • “Wall variations” has been checked off on the “S-Bend Tool” checklist.
  • “Fill settings (flats only)” has been checked off on the “S-Bend Tool” checklist.
  • “Length settings” has been checked off on the “S-Bend Tool” checklist.
  • “Ramp settings” has been checked off on the “S-Bend Tool” checklist.
2 Likes
24
  • “S-Bend Tool” has been checked off on the “Overall” checklist.
2 Likes
25
  • “Length settings” has been checked off on the “Side-Shift Tool” checklist.
  • “Ramp settings” has been checked off on the “Side-Shift Tool” checklist.
  • “S-Bend Tool” has been un-checked on the “Overall” checklist.
  • “Flat Base setting” has been checked off on the “S-Bend Tool” checklist.
2 Likes
26
  • “Side-Shift Tool” has been checked off on the “Overall” checklist.
  • “Fill settings (flats only)” has been checked off on the “Side-Shift Tool” checklist.
  • “Wall Height settings” has been checked off on the “Side-Shift Tool” checklist.
  • “Wall variations (Two-Sided, One-Sided, None)” has been checked off on the “Side-Shift Tool” checklist.
2 Likes
27
  • “Length settings” has been checked off on the “Path-Curve Tool” checklist.
  • “Wall Height settings” has been checked off on the “Path-Curve Tool” checklist.
  • “Wall variations (Two-Sided, One-Sided, One-Sided Reversed, None)” has been checked off on the “Path-Curve Tool” checklist.
  • “Base Height settings” has been checked off on the “Path-Curve Tool” checklist.
  • “Flat Base setting” has been checked off on the “Path-Curve Tool” checklist.
  • “Ramp settings” has been checked off on the “Path-Curve Tool” checklist.
2 Likes
28
  • A new checklist named “Half-Pipe Tool” has been added to the card.
  • “Length settings” has been checked off on the “Half-Pipe Tool” checklist.
  • “Length settings” has been checked off on the “Half-Pipe Tool” checklist.
  • “Base Height settings” has been checked off on the “Half-Pipe Tool” checklist.
  • “Flat Base setting” has been checked off on the “Half-Pipe Tool” checklist.
2 Likes
29
  • A new checklist named “Ramps Tool” has been added to the card.
  • “Steepness settings” has been checked off on the “Ramps Tool” checklist.
  • “Half-Pipe Tool” has been checked off on the “Overall” checklist.
  • “Wall Height settings” has been checked off on the “Half-Pipe Tool” checklist.
2 Likes
30
  • The checklist "Ramps Tool has been re-named to “Ramp Tool”.
  • “Ramp Type variations (Ramp-Start, Ramp-End, Mid)” has been checked off on the “Ramps Tool” checklist.
1 Like
31
  • A new checklist named “Intersection Tool” has been added to the card.
  • “Intersection Tool” has been checked off on the “Overall” checklist.
  • “Wall Height settings” has been checked off on the “Intersection Tool” checklist.
  • “Fill settings” has been checked off on the “Intersection Tool” checklist.
  • “Corner Type setting (90, 45, Curve)” has been checked off on the “Intersection Tool” checklist.
1 Like
32
  • A new checklist named “Holes Tool” has been added to the card.
2 Likes
33
  • “S-Bend Tool” has been checked off on the “Overall” checklist.
  • “Base Height settings” has been checked off on the “S-Bend Tool” checklist.
2 Likes
34
  • “Dip setting” has been checked off on the “Holes Tool” checklist.
  • “Hole Type setting (Flag Hole, Drop Hole)” has been checked off on the “Holes Tool” checklist.
  • “Ramp Tool” has been checked off on the “Overall” checklist.
  • “Holes Tool” has been checked off on the “Overall” checklist.
2 Likes
35
  • “Coloring Flag” has been checked off on the “Overall” checklist.
  • “Coloring Start Pad” has been checked off on the “Overall” checklist.
2 Likes
36
  • “Flag Light Mode” has been checked off on the “Overall” checklist.
2 Likes
37
  • “Wall variations (Two-Sided, One-Sided, None)” has been checked off on the “Ramp Tool” checklist.
2 Likes
38
  • “Wall Height settings” has been checked off on the “Ramp Tool” checklist.
  • “Flat Base setting” has been checked off on the “Ramp Tool” checklist.
  • “Curve Tightness settings” has been checked off on the “Ramp Tool” checklist.
2 Likes
39
  • “Intro Camera” has been checked off on the “Overall” checklist.
2 Likes
40
  • “End Piece Tool” has been checked off on the “Overall” checklist.
2 Likes